How To Draw An Easy Tractor

How to Draw a Tractor

Pace-past-step instructions plus video tutorial showing how to describe a tractor.

Prep Time 0 mins

Craft Fourth dimension 30 mins

Total Time thirty mins

1 Pencil
Colored Pencils, Crayons and/or Felt Markers Diverseness of colors
one Slice Paper

Draw one large circle with two smaler circles inside. This is the smaller front end wheel of the tractor.
Depict a larger circle but practise then with a jagged line for the tire tread. This will form the rear, larger wheel of the tractor.
Draw a medium-sized circle inside the larger, rear bicycle. So draw a smaller circumvolve within the medium-sized circle.
From the 10 O'clock position on the front whell draw a small perpendicular line. Attached to that describe a triangle on its side with rounded corners. This volition form the forepart light.
From the elevation of the light, draw an upward line slightly angled outward for well-nigh one inche. And so right angle a line toward the rear bicycle. Draw this line about four/5ths of the way to the rear wheel and then draw a right angle downward to just below the top of the front wheel.
From the bottom of the vertial line betwixt the two wheels, depict a rounded rectrangle as shown. Draw a slightly larger one below it with a small gap. These are the steps into the tractor.
Draw 2 small vertical lines connecting the ii steps. From the right side of the larger, bottom pace, describe a horizontal line connecting the bottom step to the big, rear wheel.
From the left (front) side of the height step, draw a horizontal line to the front wheel.
For the front bumper, draw a line extending from the bottom of the hood at a slight outward angle to one-half-way downwardly the front bicycle, and so bending it slightly inward for one cm. Stop it with a right bending line to the front end cycle.
Depict a serial of vertical lines on the tractor body extending from the top of the front bicycle to the horizontal line above.
For the engine exhaust, draw 3 circles to the correct (in front) of the steps.
Depict an long horizontal rectangle on acme of the electric current tractor torso. The front of the rectangle should not extend all the fashion to the front end.
From the right side of the horizontal rectangle you drew in the previous step, describe a vertical line about one centimeter. Do a right angle to the left extending almost to the forepart. And so a shart downard angle line.
Describe a vertical rectangle on pinnacle fo the torso with rounded top. This volition be the tractor's exhaust pipe.
Draw an upward line lightly angled to the right from the meridian step. This line angles in a series arching over the rear wheel.
Draw a parallel line above the line but drawn higher up the rear cycle.
Draw a horizontal line from the front of the rear wheel hup to the the front body of the tractor connecting simply beneath the summit of the body.
Draw the cab extending from the correct side of the tractor hood upwardly, and then a right angle to the right to almost the rear and so down to the top of the rear wheel hub.
For the tractor roof, draw a thin horizontal rectangle on top of the cab. The ends should extend slightly beyond the sides.
For the tractor windows, draw 2 shapes as shown in the tractor cab section of the drawing.
At present you tin color the tractor any color yous similar. Your done.